攝像頭出口日本是需要辦理MIC認證的,這是一項強制認證。日本《無線電法》要求,對指定的無線電設備進行型號核準(即技術法規符合性認證)。telec認證是強制性的,認證機構為mic在指定無線電設備范圍認可的注冊認證機構,telec(telecom engineering center)是日本無線電設備符合性認證的主要注冊認證機構,telec在日本也叫mic認證, telec為mic指定發證機構之一,故統稱telec認證。日本TELEC認證又稱MIC認證/GITEKI認證/電波法認證,是針對進入日本市場的無線發射產品的認證,是強制性的認證。
日本MIC認證測試項目
1、頻率誤差測試(Frequency Error Measurement)
2、耦合帶寬/載頻帶寬測試(Occupied Bandwidth and Spread-spectrum Bandwidth / Factor)
3、雜散騷擾測試(Unwanted Emission Intensity Measurement)
4、天線功率誤差測試(Antenna Power Error Measurement)
5、接收機雜散騷擾測試(Limitation of Collateral Emission of Receiver Measurement)
6、EIRP天線功率測試(Transmission Antenna Gain (EIRP Antenna Power) Measurement)
7、3dB波瓣帶寬測試(Transmission Radiation Angle Width (3dB Beamwidth) Measurement)
8、占空比測試(Duty Cycle Measurement)
9、占用時間測試(retention time)
攝像頭監控器辦理日本MIC認證所需資料
1、電路原理圖Schematics
上一篇:無線產品RED指令的相關測試介紹
下一篇:歐盟修訂食品接觸的塑料材料和制品法規(EU) No 10/2011